Mornings are never really the same when there is no access to some hot and delicious espresso. This is why it is good to know how to do basic Saeco Repairs in New York City. When the machine breaks down, fret not, here are some troubleshooting tips to try and get the morning back on track.
• Believe it or not, one of the most oft-cited reasons why a Saeco machine will not work is simply because the power switch is not on. Therefore, before any repairs are attempted, make sure the power switch is in the “on” position.
• The service door should be closed. Even if it is ajar only a little, there will be no message which is displayed on the display screen.
• Unplug the espresso maker from the wall outlet and proceed to remove the container that holds the coffee by unscrewing the two fasteners. Twist the adjustment ring until it lines up with the two blue marks while at the same time lifting up on the adjustment lever. This will allow the adjustment ring to be removed from the machine. Use a small vacuum or even just a gentle brush to remove any dried coffee debris from the gear box. After this is done, put the machine back together the same way it was taken apart, only in reverse.
• Check for clogs in hot water or steam spout by inserting a thin needle into it. A clog will not allow any water or steam to come forth from the spout. This is one of the easiest Saeco Repairs in New York City.
• If the problem seems to be the speed in which the coffee is dispensed, simply adjust the grinder level. Raise it if the coffee is being dispensed too slowly and lower it if the coffee is being dispensed too quickly.
• Remember to descale the machine on a regular basis to avoid nasty build-up. Some of the most common problems espresso machine owners face are the direct result of a machine with a scaly build-up.
If the machine seems to need more in-depth repair, do not hesitate to contact us. The machine can be back up and running in no time flat.
