Your vehicle is a complex assortment of moving components, and this is especially true of modern engines. For an internal combustion engine to work, the pistons must compress a mixture of fuel and air in each cylinder and burn this fuel before the exhaust cycle. This means that at least two valves need to operate at specific times to allows the fuel and air to mix and the exhaust gas to release in perfect harmony with the position of the piston. Of course, some engines use more valves, but this only complicates the matter. In most engines, this precise timing is provided by a timing belt or chain.
Timing Belt Replacement in Ewa Beach can be a complicated process because the mechanic may need to remove a number of other systems to reach the belt. In most vehicles, the timing belt is inside the front of the engine, but this will depend on the engine type and size. Front wheel drive vehicles often have the engine sideways, so the belt will be located on one side or the other. With many smaller engines, the belt will be made from synthetic rubber. This is usually reinforced with some type of fiber to prevent excessive stretching. On the inside of the belt will be teeth that grab the various gears the belt is expected to turn. With some engines, this may only be the camshaft being driven by the crankshaft.
Once your engine has a Timing Belt Replacement in Ewa Beach, it is time to adjust the engine so that everything runs smoothly. Timing is critical because even the ignition system requires perfect timing so that the fuel is burned at the correct time. The basic cycle begins with the piston down and the intake valve open. This allows fuel to enter the cylinder. The piston is forced up by the starter or pressure from combustion in other cylinders. This compresses the fuel and air mix so it will explode when the ignition system sends a current through the spark plugs. The combustion causes an explosion that pushes the cylinder down and turns the crankshaft. As the piston comes up again, another valve will open to let out the exhaust gas. Without a tight timing belt to control things, the engine could misfire or fail to run at all. To learn more, visit website. You can also visit them on Facebook for more information.
