The electrical system in your home is a very complex one. When something is going wrong, you should contact a licensed electrician. Before you do so, however, you should do some electrical troubleshooting wichita. There are a few simple steps to follow to troubleshoot your problem, before you contact a professional electrician.
Determine the Section of the Wiring With the Problem
If just one appliance or light is not working properly, it is most likely just the appliance or light that is broken. In this case, you would need to contact a professional in appliance repair to fix the problem. If the problem is a light, check to make sure that the bulb is not blown.
Check All Nearby Lights and Appliances
If you do have an electrical problem in your home, the next step in electrical troubleshooting wichita is to check what other appliances or lights are not working. These will be relatively close to each other.
Check the Circuit Breaker
The problem with the section of the house that is not getting an electrical current, could be the breaker box. Most breaker boxes are located in the basement, garage, or in a utility closet. If a breaker is tripped, there will be a red mark on the breaker switch.
Check the Corresponding Appliances
Most breaker boxes have labels next to each breaker, so that you know what appliances or area of the home are hooked up on that breaker. You should check the label on the tripped breaker, to make sure that it corresponds with the appliances and lights that are not working in the home.
Unplug Appliances
The next step in electrical troubleshooting wichita is to unplug all of the appliances and turn off the lights on the affected circuit. After everything is unplugged and off, reset the breaker.
Try the Appliances and Lights Again
The final step in electrical troubleshooting wichita is to try the appliances and lights that were not working again. If they are working, and the breaker does not trip again, your problem is solved. The likely reason that the breaker tripped, is because you were running too many appliances on one breaker. If the breaker trips again, you would need to contact a licensed electrician to diagnose and repair the problem.
Knowing how to troubleshoot an electrical issue can save you the time and cost of bringing in an electrician, if it was a simple fix.